55 Inch V Winch Brother Strap
Our 55 Inch V Winch Brother Strap provides additional reach and versatility for larger vehicles. It is designed for secure vehicle recovery and transport operations where strength, durability and adjustability are essential.
 
Manufactured from heavy-duty 50mm polyester webbing, this twin-leg assembly measures 1400mm (55”) in full extension and is configured in a traditional “V” formation from a central master link. Each leg terminates in a delta snap hook for fast, secure attachment.
 
Two position delta hook back points are fitted on each leg, allowing the strap to be shortened or adjusted depending on vehicle geometry and anchor position. From the first delta ring downwards, reinforced protective sleeving is fitted to help guard against abrasion in high-wear areas during loading.
 
W.L.L. 1,000kg
Break Force: 7,000kg
Width: 50mm
Length: 1400mm (55")
 
Due to a high stock turnaround time not every product will always come exactly as seen in the image. you may receive a product in a different shade or with small differences to the hardware itself. If you have a specific requirement please call us to confirm the spec on our current stock.
 
Important Usage Guidance:
Each leg is designed to pass around a suspension component, such as a wishbone, and hook back into the delta links on the strap legs. This creates a secure and balanced pull when winching vehicles onto a flatbed.
 
This strap is specifically intended for straight-line recovery loading. Correct positioning and alignment are essential for safe operation.
 
Do not attach to driveshafts or track rods.
Do not use for angled pulling.
Not suitable for pulling vehicles out of ditches or for snatch recovery.
The strap must remain straight under load.